Anti-UAV Drone System
Home - Products - Drone(UAV) System - Anti-UAV Drone System

Vehicle UAV Drone Detection And Control System

The main function

● Remote detection of civilian drones in the air;

● Judge the position of aerial civil drones;

● Real-time upload of alarms and identification results through the control interface, supporting wireless linkage with interference suppression equipment;

● No computer is required, can work independently, long-term operation is highly reliable and maintenance-free.

Vehicle UAV drone detection and control systemEquipment introduction

Equipment Introduction

Capable of flexible mobility. The UAV drone omnidirectional detection and radio interference suppression equipment is fixed on the roof of vehicles , which can realize 360 ° detection and interference integrated prevention and control, real-time detection of multi-rotor UAV drone targets within 3 kilometers around. When a UAV drone appears, turn on countermeasure equipment immediately, dispose of the UAV drones , to ensure low-altitude safety in the protected area.

In addition, as a need for blind zone supplementary defense and mobile duty, hand-held radio interference suppression equipment can also be equipped.

Vehicle-mounted UAV drone countermeasure system consists of UAC drone omnidirectional detection equipment and radio interference suppression equipment (front and rear).

UAV drone omnidirectional interception unit

Equipment Introduction

The UB-360 civilian UAV drone omnidirectional interception unit sends electromagnetic waves of a certain intensity to electromagnetically interfere, with the remote control signals and satellite positioning signals of the civilian UAV drones, to prevents it from continuing to fly or forces it to land in place. It is used to form a civil UAV drone defense circle in a certain area to prevent its invasion. This device can be used independently to form an active civilian UAV drone defense system, or it can be combined with detection equipment to form a fully automatic reactive civilian UAV drone defense system.

The main function

● Remote detection of civilian drones in the air;

● Judge the position of aerial civil drones;

● Real-time upload of alarms and identification results through the control interface, supporting wireless linkage with interference suppression equipment;

● No computer is required, can work independently, long-term operation is highly reliable and maintenance-free.

Main performance index

● Detection frequency band: Frequency band 1: 1000 ~ 1500MHz

Band 2: 2400 ~ 2500MHz

Band 3: 5600 ~ 5950MHz

Band 4: 300 ~ 1000MHz (optional band, external antenna)

● Working mode: spectrum scanning, decoding, protocol analysis

● Identification type: WiFi, OFDM, FM

● Directivity: Horizontal 0 ~ 360 degrees Tilt 0 ~ + 90 degrees

● Horizontal resolution: 8 directions

● Detection radius: 3 to 5 kilometers

● Response time: <20 seconds

● Power supply mode: AC100 ~ 240V

● False alarm rate: ≤1 time / 24 hours (under urban outdoor electromagnetic environment)

● Power consumption: < 50W

● Volume: 610mm (diameter) x 160mm (height)

● Weight: 15kg

● Protection level: IP65

● Working environment: -40 ~ + 60 ℃

● Control interface: RS422 / network

Radio interference suppression equipment

Equipment Introduction

Radio interference suppression equipment is to electromagnetically interfere with the remote control signals and satellite positioning signals of civil UAV drones, by transmitting electromagnetic waves of a certain intensity, so as to force civil drones to lose connection with the remote control or fail to receive satellite positioning signals correctly, making it impossible to continue flying or force it to land in place. It is used to form a civil UAV drone defense circle in a certain area to prevent its invasion. This device can be used independently to form an active civilian drone defense system, or it can be combined with detection equipment to form a fully automatic reactive civilian UAV drone defense system.

The main function

● Adjustable transmit power;

● Covers GPS / GLONASS / GALILEO / BeiDou satellite positioning signals;

● Can be controlled through the control interface, and supports wireless linkage with detection equipment;

● No computer required, can work independently, long-term operation, high reliability and maintenance-free

Main performance index

● Working frequency band: Frequency band 1: 902 ~ 930MHz

Frequency band 2: 2400 ~ 2483MHz

Band 3: 5725 ~ 5850MHz

Band 4: 1559 ~ 1620MHz

● Transmitting power: Band 1: 40W

Band 2: 40W

Band 3: 10W

Band 4: 20W

● Directionality: horizontal ± 60 degrees

Tilt -10 ~ + 90 degrees

● Operating radius: 3 km

Main performance index

● Operating radius: 3 km

● Power supply mode: AC100 ~ 240V

● Power consumption: <450W

● Volume: 360mm (length) × 220mm (width) × 183mm (height)

● Weight: 15kg

● Protection level: IP67

● Working environment: -40 ~ + 60 ℃

● Control interface: RS485 / network

We will provide you with professional services, welcome to consult
Online Service×
We have get many patents already, keep very good cooperation with many military enterprises and scientific research institutions. Good quality and competitive price are always our advantage.