We are a professional manufacturer of electric lifting platforms
. The following methods are available for mid-year maintenance of electric lifting platforms:
1. Check all the hydraulic pipes and joints of the electric lifting platform. The pipes must not be damaged, the joints must not be loose, and all joints must be tightened.
2. Check whether the piston rod of the electric lifting platform oil cylinder and the transparent plastic vent pipe have oil. If there is too much oil, the seals of the oil cylinder may fail or the oil volume in the oil tank is too full.
3. Remove and disassemble the lowering valve, blow the plunger with compressed air, then install and reinstall it.
4. Discard the hydraulic oil of the electric lifting platform, loosen the joint, remove the oil suction filter, clean it with kerosene, clean it with compressed air, then put it back into the fuel tank and connect the pipeline.
We are manufacturer of electric lifting platform, if you want to buy electric lifting platform, please contact us, we will give you the most suitable quotation and look forward to your inquiry.