当前位置:
产品详情
The main function of Multi-roter UAV
a, With one-button take-off, forward flight, inverted flight, side flight, horizontal rotation, fixed-point hovering, flying around the point, landing in place, landing at home, etc
b, It has two flight control modes: manual control and program control;
With Beidou / GPS dual-mode tri-frequency integrated navigation and positioning function;
c, Using dual antenna orientation, with strong anti-interference ability;
d, With route planning function, flight planning functions such as flight route, waypoint, and mission hover time etc;
e, With comprehensive information display, recording and playback functions. The ground station can automatically record, display, and play back information such as geographic information, flight status, and mission load data;
f, Maps can be downloaded offline;
g, With system protection function. It can realize system self-test, remote control interrupted home landing, low voltage home landing, navigation signal loss local landing, single motor failure safe landing, etc
h, With multi-type mission load function, it can carry multi-type mission loads such as optical reconnaissance, electronic reconnaissance and fire strike.

The main indexes of Multi-roter UAV
Takeoff weight:   17kg (six rotors) ; 9kg (four rotors)
Maximum mission load weight: 5kg (six rotors) ; 2kg (four rotors)
Life time: 40min (six rotors with 5kg load) ;40min (four rotors with 2kg load)
Maximum flying height: 1000m
Takeoff altitude: 4500m
Wind resistance: ≧ 12.5m / s
Maximum flying speed: ≧ 12.5m / s
Measurement and control frequency band: L frequency band
Measurement and control distance: ≧ 10km
Data transmission rate: 5Mbps, with encryption function